Toshiba Portege 3490 - Manual (Page 39)

Multi Media Port Replicator User’s Manual 39
Version
1
Last Saved on 13/03/00 17:13
User's Manual – Port_Rep.doc – PART 01 -- ENGLISH – Printed on 13/03/00 as 01_PRep
GB
PS/2 mouse
Problem Procedure
No response from
PS/2 mouse
Make sure the PS/2 mouse cable is firmly
connected to the PS/2 mouse/keyboard port on
the Multi Media Port Replicator.
On-screen pointer
does not respond to
PS/2 mouse operation
Check that the PS/2 mouse cable’s 6-pin
connector is firmly connected to the
mouse/keyboard port.
You may have connected the mouse after turning
the computer on. Turn off the computer, make
sure the mouse is firmly connected and turn the
computer back on.
Is the Pointing Devices option in Hardware Setup
or TSETUP program set properly?
Is your software configured to recognise the
mouse? Check the software documentation.
If problems persist, contact your dealer.
Serial mouse
Problem Procedure
On-screen pointer
does not respond to
serial mouse operation
Check for a firm connection between the Multi
Media Port Replicator’s serial port and the cable’s
9-pin connector.
Did you connect the mouse before turning on the
computer?
Is the Serial port option in Hardware Setup or
TSETUP program set properly?
Is your software configured to recognise the
mouse? Check the software documentation.
If problems persist, contact your dealer.