Pioneer DV-989AVi-S - Manual (Page 95)

Additional information 09
95
En
English
No HDMI video output • Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
• It is not possible to output SACD source from the HDMI connection.
• Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible. (An HDMI connection can only be
made with components compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP).)
• This unit has been designed to be compliant with HDMI (High
Definition Multimedi
a Interface) Version 1.1. Depending on the
component you have connected, using a DVI connection may
result in unreliable signal transfers.
• Check that the PURE AUDIO indicator is not lit. If it is, press the
PURE AUDIO button ( See also Front panel on page 24).
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See
HDMI Settings on
page 72 to change the HDMI resolution.
No multichannel HDMI
audio. • Make sure the Audio setting in the HDMI menu is set to Auto (see
HDMI Settings on page 72 to do this).
A connected DVI
component (with HDCP)
doesn’t work with this
player. • This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface) Version 1.1. Depending on the
component you have connected, using a DVI connection may
result in unreliable signal transfers.
Color problems occur with
your monitor after changing
the Video Adjust (page 58),
Video Memory (page 73). • You can correct this by choosing an input setting on your monitor
according to the setting you’ve selected (see the table in the note
following
Video Memory on page 73).
Problem Remedy
DV-989_en.book Page 95 Monday, July 25, 2005 7:37 PM