Pioneer DV-989AVi-S - Manual (Page 77)

Initial Settings menu 08
77
En
English
Channel Level
• Default setting: Fix
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
These settings do not affect any digital audio
output.
When set to Fix , the level of each of the 5.1
channel analog outputs is fixed. Choose
Variable if you want to adjust the relative
levels to balance the surround sound better
for your listening room.
You can set the individual channel levels
between –6dB and +6dB in 0.5 dB
increments using the test tone output as a
guide to set the correct levels. Adjust the
levels until the output level from all channels
sounds the same from your usual listening
position. Note that
Audio Output Mode
(page 75) must be set to 5.1 Channel in order
to use the test tone.
Automatic: Select Auto to start the test tone
output. No sound will be heard from the
subwoofer.
As the test tone plays through each speaker in
turn, it is highlighted on-screen. Use the
Joystick (up/down) to adjust the channel
output level of the current speaker. Move the
cursor left to exit the test tone sequence, or
press
ENTER to save the settings and exit the
Channel Level setting screen.
Manual: Use the Joystick to move the cursor
up/down to select a speaker.
Move the cursor right (or press ENTER ) then
use the Joystick (up/down) to set the channel
output level.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
Fix
Variable
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
DV-989_en.book Page 77 Monday, July 25, 2005 7:37 PM