Connecting up 02, Using other types of video output, English – Pioneer DV-989AVi-S User Manual
Page 15: Connecting using an s-video output, Connecting using the av connector output, Connecting using hdmi, On page 21 for more on this, You can use the s-video output instead of the, Video out, Audio out l/r

Connecting up
02
15
En
English
2
Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
• Do not unplug the player from the power
outlet while it is switched on.
• Do not plug this player into a switched
power supply found on some amplifiers
and AV receivers.
Using other types of video
output
This player has standard (composite), S-video
and component video outputs, as well as an
HDMI connector (for digital video/audio). The
main difference between them is the quality
of the picture.
S-video delivers a better picture than standard
composite video, while component video
gives better picture quality still. The variety of
outputs also gives you the flexibility of
connecting your particular equipment using
the best connection type available.
HDMI provides highest quality digital video
(and audio) using one simple digital
connection, provided your monitor or display
is also equipped with HDMI. See
Connecting
using HDMI
on page 21 for more on this.
Connecting using an S-Video output
You can use the S-Video output instead of the
VIDEO OUT
jack to connect this player to
your TV (or other equipment).
•
Use an S-Video cable (not supplied) to
connect the S-VIDEO OUT to an S-Video
input on your TV, monitor or AV receiver.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
• If you connect both S-video jacks, but one
of the connected components is not S1/
S2 compatible, the automatic aspect ratio
switching will not work with either
connected component.
Connecting using the AV connector
output
If your TV has a SCART-type AV input, you can
use a SCART cable to connect this player to
your TV. This type of connection carries both
the sound and the picture, so there’s no need
to connect up the
AUDIO OUT L/R
and
VIDEO OUT
jacks.
•
Use a SCART cable (not supplied) to
connect the AV CONNECTOR 1 (RGB)-TV/
AV Receiver to an AV input on your TV.
CONTROL
IN
OUT
S-VIDEO
OUT
VIDEO
OUT
COMPONENT VIDEO OUT
P
B
P
R
Y
2
1
2
1
AV CONNECTOR 2
AV CONNECTOR 1 (RGB)-TV/AV Receiver
TV
S-VIDEO
INPUT
AV CONNECTOR 1 (RGB)-TV/AV Receiver
AV CONNECTOR 2
OPTICAL
COAXIAL
R
L
R
L
SUB
WOOFER
AUDIO
OUT
(2ch)
CENTER
SURROUND
FRONT
AUDIO OUT
(5.1ch)
DIGITAL AUDIO
OUT
(AUDIO)
HDMI OUT
S400
2
1
2
1
VIDEO
OUT
S-VIDEO
OUT
COMPONENT VIDEO OUT
CONTROL
IN
OUT
P
B
P
R
Y
SCART
TV
DV-989_en.book Page 15 Monday, July 25, 2005 7:37 PM