Pioneer DV-989AVi-S - Manual (Page 31)

Getting Started 04
31
En
English
• The front panel POWER button switches
the player on and off. When the player is
off, it can only be switched back on using
the same front panel button.
When the player is on, you can put it into
standby using the
STANDBY/ON
button on the remote control.
• When the player is in standby, you can
use the OPEN/CLOSE and (play)
buttons to switch the player on and open
the disc tray/start playing a loaded disc.
• My DVD player switches on but there is
nothing displayed on my TV.
Make sure that the TV is set to the correct
video input (not a TV channel). For
example, if you connected this player to
the
VIDEO 1 inputs on your TV, switch
your TV to VIDEO 1 .
• If you connected this player to an AV
receiver, make sure that the receiver is
switched on and set to the correct input.
• This player features a screen saver. When
on, If the player is stopped or paused and
no button is pressed for five minutes, the
screen saver starts. See
Screen Saver on
page 67 for how to switch it on.
Let’s Get Started
When you switch on the player for the first
time, you should see a welcome screen
displayed on your TV. From here you can let
the player know what kind of TV you have,
then either use the Setup Navigator to make
more settings, or jump right in and start
playing some discs.
Before continuing, make sure that you’ve
loaded the batteries in the remote control.
• If you have connected an HDMI-
compatible device, the HDMI settings
screen will appear instead of the setup
screens below. See
HDMI Settings on
page 72 to make the necessary settings.
1 Use the Joystick (up/down) to choose
a language, then press ENTER.
POWER
E/ E/
SETUP TOP MENU
MENU
– MULTI SPEED +
ENTER
VIDEO
ADJUST DIMMER JOG MODE RETURN
V.ADJ FL JOG
PLAY MODE SURROUND
8 7 3
4 ¢ 1 ¡
Let's Get Started Menu
Select the display language
using the cursor keys on the remote
English
français
Deutsch
Italiano
Español
Nederlands
Choose one then press Enter
DV-989_en.book Page 31 Monday, July 25, 2005 7:37 PM