Pioneer DV-989AVi-S - Manual (Page 41)

Getting Started 04
41
En
English
outputs. In addition, high sampling rate
DVD-Audio discs (96kHz or higher)
automatically downsample audio output
from the optical/coaxial digital outputs.
Using the multichannel analog audio
outputs or the i.LINK connector for DVD-
Audio have none of these limitations.
• I’ve connected to a HDMI/DVI compatible
component but I can’t get any signal and
the front panel HDMI indicator won’t light!
Make sure that you’ve selected this player
as the HDMI input in the settings for the
component you’re using. You may need to
refer to the instruction manual of the
component to do this.
An HDMI connection can only be made
with components compatible with both
DVI and High Bandwidth Digital Content
Protection (HDCP). See
Connecting using
HDMI on page 21 for more on HDMI
compatibility.
• There’s no picture from the HDMI output!
Depending on the source material, you
may not be able to get a picture from DVI-
compatible sources. DVI sources must
also be encoded using High Bandwidth
Digital Content Protection (HDCP) for you
to see a picture using this player. See
Connecting using HDMI on page 21 for
more on HDMI compatibility.
Make sure the resolution on this player
matches that of the component you have
connected using HDMI. See
HDMI
Settings on page 72 to change the HDMI
resolution.
DV-989_en.book Page 41 Monday, July 25, 2005 7:37 PM