Pioneer DBR-TF100GB - Manual (Page 31)

Other options 08
31
Software Update
The DTR can automatically download
software updates through the TV aerial. You
can set the options for the software update
in the Software Update menu. Follow these
steps to access the Software Update menu:
1 While viewing a programme, press
MENU. The HOME MENU is displayed.
2 Press 5/∞ to select Setup and press
SELECT. The Setup menu is displayed.
3 Press 5/∞ to select Software Update
and press SELECT. The Software Update
menu is displayed.
4 Press
5/∞ to select any of the following
four functions: Auto Update, Set Update
Time, Start Manual Update or Technical
Information and then follow the instructions
for each.
• Press MENU or EXIT to exit the menu.
• Press RETURN to return to the previous
menu.
Auto Update
Press 2/3 and choose Auto Update On/Off.
When Auto Update is on, a check for
available software updates and new
channels is accomplished daily at a time
specified in Set Update Time.
• So that you always have the latest
software and broadcasting channels, be
sure to turn Auto Update to on.
Set Update Time
Select to set the time at which the DTR will
check for updates on a daily basis. Press
5/
∞ to adjust the hour and then 3 to move to
minutes. Again, press
5/∞ to adjust the
minutes and then press MENU to set and
exit the menu.
DBR-TF100GB_27_32.p65 7/22/03, 12:15 PM 31