Pioneer DBR-TF100GB - Manual (Page 18)

Advanced operation 05
18
Editing a timer setting (Cancel/
Modify/Move)
You can cancel/modify/move a timer setting.
1 Display the Programme Timer menu.
2 Press 5/∞ to select the timer slot to be
edited, then refer to the instruction below.
• To cancel the setting, press the RED
button. The setting is cancelled.
• To modify the setting, press SELECT.
You can modify the setting.
• To move the setting, press the BLUE
button. Press 5/∞ to move the
selected timer slot and then press the
BLUE button.
• If you are watching a digital programme
when a timer is about to start, an alert
will appear on the screen about one
minute before the timer starts. To view
the timer programme, press SELECT. To
cancel the timer programme press
2/3
to select CANCEL TIMER and press
SELECT. If you do not press any buttons
the timer will start at the programmed
time.
• When a programme set by the timer is
playing, the LED turns orange.
• If any button is pressed while a timer is
active an alert will appear on the screen.
Press EXIT to cancel the timer and
return the DTR to viewing a digital
programme or do nothing and the timer
will continue.
Freezing a frame
You can freeze display of a frame from a
programme.
1 While viewing a programme, Press 2.
The image freezes on screen.
2 To continue viewing the programme
press 3.
Taking snapshots
You can take snapshots of scenes from
programmes to save and view later.
1 While viewing a programme, Press 2.
The image freezes on screen.
2 Press SELECT to take a snapshot. The
snapshot is taken and the programme
resumes normal display.
DBR-TF100GB_16_26.p65 7/22/03, 12:15 PM 18