Pioneer DBR-TF100GB - Manual (Page 10)

Connections 02
10
Television and VCR with only standard coaxial aerial input
• Before making connections unplug all
equipment from the mains power
supply.
1 Connect the equipment as shown in the
above diagram but do not yet connect the
aerial to the DTR.
2 When you have finished making the
connections, plug in the equipment. First
turn on the TV and select an unused channel
to use for watching digital programmes.
Next turn on the VCR (at this time it does not
matter to what channel the VCR is tuned).
VIDEO
AERIAL
TV set 230V
VCR TV OPTICAL AERIAL 50Hz TV
AERIAL
TV
Digital Terrestrial Receiver
AERIAL
3 Press the STANDBY button on the
remote to wake up the DTR.
4 Tune the TV.
Now you need to tune the TV channel for
watching digital programmes. If you are not
sure how to do this, refer to the TV’s
operation guide. Store the channel when the
“Welcome” screen appears on the TV as
shown below.
5 Connect the aerial to the DTR and check
if the picture remains steady (no wobbling,
interference, or snow).
DBR-TF100GB_09_15.p65 7/22/03, 12:14 PM 10