Pioneer DBR-TF100GB - Manual (Page 23)

Using parental lock 06
23
4 Use the number buttons to input your
PIN.
5 Press 2/3 to switch between Off,
Normal or Watershed. Go on to the next
Locking/unlocking channels below.
• If you enter the wrong PIN a message is
displayed and you cannot set Parental
Lock options.
Locking/unlocking channels
Channels must be locked/unlocked individu-
ally. Follow these steps to lock/unlock a
particular channel.
1 Press
5/∞ to select Channel Options
and press SELECT. The Channel Options
menu is displayed.
2 Press 5/∞ to select the channel to lock/
unlock. Press
2/3 to move to the lock box
(the box with the padlock icon over it). Press
SELECT to place/remove a check in the box
and lock/unlock the channel.
3 Repeat Step 2 to lock/unlock additional
channels.
4 Press MENU to complete the setting
and exit the menu.
• Enter your PIN if prompted.
Watching locked channels
When parental control is on and you select a
channel that is locked, a blank screen
displays with a channel banner that says,
“This channel is locked. Press Red to
unlock.”
1 Press the RED button. The PIN input
screen is displayed.
2 Use the number buttons to input your
PIN.
• If you unlock a channel in this way, all
channels are unlocked and remain
unlocked until the DTR again is put in
standby mode or a new channel is
locked.
DBR-TF100GB_16_26.p65 7/22/03, 12:15 PM 23