Pioneer DBR-TF100GB - Manual (Page 28)

Other options 08
28
Screen Saver
Press 2/3 to switch between screen saver
modes. You can also select Off or Random.
If you select Random, the screen saver
mode used is selected randomly.
While listening to a radio channel and if no
buttons are pressed for one minute a screen
saver is displayed. Press any key other than
the STANDBY button to quit the screen
saver.
Digital Audio Out
Press 2/3 to select PCM/Dolby.
If you have a Dolby Digital decoder-equipped
audio device connected to the optical digital
audio output socket on the DTR, select
Dolby. Otherwise, select PCM.
• When Dolby is selected and a
programme is broadcast in Dolby Digital,
audio is not output through the SCART
socket.
Banner Timeout
When you change channels a banner
showing channel and programme informa-
tion is displayed for a selected amount of
time or is not displayed, according to the
settings you make here. Press
2/3 to select
from No Banner or a time of 1 to 10
seconds.
TV Setup
The TV Setup menu allows you to select and
set TV and video options. To set any prefer-
ence, go to the TV Setup menu as follows:
1 While viewing a programme, press
MENU. The HOME MENU is displayed.
2 Press
5/∞ to select Setup and press
SELECT. The Setup menu is displayed.
3 Press 5/∞ to select TV Setup and press
SELECT. The TV Setup menu is displayed.
4 Press 5/∞ to select the preference you
wish to set, then refer to the instructions
below.
DBR-TF100GB_27_32.p65 7/22/03, 12:15 PM 28