Pioneer AVIC-F20BT - Manual (Page 71)

Using the touch panel keys
5
1
3 4
2
1 Performs manual tuning
To tune manually, touch [o] or [p] briefly.
The frequencies move up or down one step at
a time.
Performs seek tuning
To perform seek tuning, touch and hold [o]
or [p] for about one second and release.
The tuner will scan frequencies until a broad-
cast strong enough for good reception is
found.
p You can cancel seek tuning by touching
either [o] or [p] briefly.
p If you touch and hold [o] or [p],
you can skip broadcasting frequencies.
Seek tuning will start as soon as you re-
lease the keys.
p You can also perform these operations
by using the TRK button.
2 Selects a preset channel
The keys can be used to switch preset chan-
nels.
Scroll by dragging the keys up or down to dis-
play the preset channel you want to select,
and tap the channel.
p The lower key and the upper key appear
only when the preset channel is se-
lected.
3 Recalls equaliser curves
= For details, refer to Using the equaliser
on page 139.
4 Displays the “Function” menu
= For details, refer to Using the
“Function” menu on the next page.
5 Switches between the AV operation
screen and the preset list display
You can switch the screen display according
to your preference.
= For details of the operation, refer to
Switching between the AV operation
screen and the list screen on page 61.
Storing and recalling broadcast
frequencies
With a tap of any of the preset tuning keys
(
“P1” to “P6”), you can easily store up to six
broadcast frequencies for later recall (also
with the tap of a key).
1 Select a frequency that you want to
store in memory.
Engb
71
Chapter
14
Using
the
radio
(AM
)
Using the radio (AM)