Calculating the fuel consumption 119, Exporting the data of fuel cost, Information – Pioneer AVIC-F20BT User Manual
Page 119: Customising preferences, Calculating the fuel consumption, Exporting the data of fuel cost information

Calculating the fuel consumption
When you enter the fuelling information to the
navigation system, and export the data to SD
memory cards, you can check the fuel con-
sumption information by using the utility pro-
gramme navgate FEEDS , which is available
separately, on your PC.
p Up to 24 sets of data can be stored. You
can also export the data, as described
below.
If the entries reach the maximum number,
a new entry will overwrite the oldest one.
These calculations are based only on the infor-
mation that you provide and not on any data
from the vehicle. The fuel mileage displayed is
only a reference value, and does not guarantee
the fuel mileage displayed can be obtained.
1
Display the
“Navi Settings” screen.
= For details, refer to Displaying the “Navi
2
Touch [Fuel cons.].
The
“Fuel Mileage Setting” screen appears.
3
Touch [Fuel Price Calculation].
The
“Fuel Price Calculation” screen appears.
4
Enter the fuel consumption informa-
tion.
Enter the following items:
! Distance:
Enter the distance travelled since the pre-
vious fuelling.
p The distance is entered automatically
only when the distance travelled since
the previous fuelling is recorded.
! Fuel Pumped:
Enter the amount of fuel pumped.
! Fuel Price Per Unit:
Enter the fuel unit price.
When all the items are entered, the fuel con-
sumption is displayed next to
“Fuel cons.”.
5
Touch [OK].
The
“Fuel Mileage Setting” screen appears.
Exporting the data of fuel cost
information
Exporting the fuel cost data to an SD memory
card is possible.
p The data stored in this navigation system
will be cleared as exporting it to the SD
memory card.
p If there is previous data in the SD memory
card, the data is overwritten with new data
when current data is exported.
1
Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 13.
2
Display the
“Navi Settings” screen.
= For details, refer to Displaying the “Navi
3
Touch [Fuel cons.].
The
“Fuel Mileage Setting” screen appears.
Engb
119
Chapter
26
Customising
pr
eferences
Customising preferences