Changing the preinstalled splash, Screen, Changing to the splash screen stored – Pioneer AVIC-F20BT User Manual
Page 131: In the sd memory card, Setting for rear view camera 131, Setting for rear view, Customising preferences, Changing the preinstalled splash screen, Setting for rear view camera
! On (default):
A beep sounds.
! Off:
The beep sound is muted.
4
To finish the setting, touch [OK].
Changing the preinstalled
splash screen
You can change the splash screen to the other
images preinstalled in the navigation system.
1
Display the
“System Settings” screen.
= For details, refer to Displaying the “System
2
Touch [Splash Screen].
The
“Select Splash Screen” screen appears.
3
Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
4
Touch [OK].
The image is set as the splash screen, and the
“System Settings” screen returns.
Changing to the splash screen
stored in the SD memory card
You can change the splash screen that ap-
pears when the navigation system starts. Copy
your chosen image to the SD memory card,
and select the image to import.
p Splash screen images should be used with-
in the following formats;
— BMP or JPEG files
— Allowable horizontal and vertical size
are 2 592 pixels x 1 944 pixels or smaller
— Allowable data size is 6 MB or smaller
p Proper compatibility with allowable files is
not guaranteed.
p Imported original images will be stored in
the built-in memory, but the ability to save
these images cannot be guaranteed com-
pletely. If your original image data is de-
leted, insert the SD memory card again
and re-import the original image.
p The maximum number of images, includ-
ing the images in the built-in memory, that
can be imported and displayed on the list is
200.
1
Create a folder named
“Pictures” on the
top-most directory of the SD memory card
and store the picture files in this folder.
2
Store the picture files in the
“Pictures”
folder.
3
Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 13.
4
Display the
“System Settings” screen.
= For details, refer to Displaying the “System
5
Touch [Splash Screen].
The
“Select Splash Screen” screen appears.
6
Touch [Select from SD].
The
“Select Splash Screen” screen appears.
7
Touch the image to use as the splash
screen from the list.
The image is displayed on the screen.
8
Touch [OK].
The image is set as the splash screen, and the
“System Settings” screen returns.
p Images imported from the SD memory card
are added to the list on
“Select Splash
Screen
”.
Setting for rear view camera
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC4). (For de-
tails, consult your dealer.)
Engb
131
Chapter
26
Customising
pr
eferences
Customising preferences