Pioneer AVIC-F20BT - Manual (Page 50)

# Touch [Search Again].
The system searches for devices featuring Blue-
tooth technology that are waiting for the connec-
tion and displays them in the list if a device is
found.
9 Enter the PIN code (the default PIN
code is
“1111”) using the Bluetooth device.
Enter the PIN code while the message
“Please
follow the instructions on your mobile
phone.
” appears.
The device is registered in the navigation sys-
tem.
After the device is successfully registered, the
Bluetooth connection is established from the
navigation system.
Deleting a registered device
When you have already registered 5 Bluetooth
devices and you want to add another one, you
must first delete one of the registered devices.
p If a registered phone is deleted, all the
phone book entries and call history lists
that correspond to the phone will be also
cleared.
1 Display the
“Settings Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 18.
2 Touch [Bluetooth Settings].
The
“Bluetooth Settings” screen appears.
3 Touch [Registration].
A message prompting you to delete a regis-
tered device appears.
4 Touch [OK].
The
“Delete from Connection List” screen
appears.
5 Touch the Bluetooth device name that
you want to delete.
The registration is cancelled.
Connecting a registered
Bluetooth device
The navigation system automatically connects
the Bluetooth device selected as the target of
connection. However, connect the Bluetooth
device manually in the following cases:
! Two or more Bluetooth devices are regis-
tered, and you want to manually select the
device to be used.
! You want to reconnect a disconnected
Bluetooth device.
! Connection cannot be established automa-
tically for some reason.
If you start connection manually, carry out the
following procedure. You can also connect the
Bluetooth device by having the navigation sys-
tem detect it automatically.
Engb
50
Chapter
10 Registering and connecting a Bluetooth device