Pioneer AVIC-F20BT - Manual (Page 36)

Searching for POIs by using
the data on the SD memory
card
Creating a customised POI is possible by
using the utility programme navgate FEEDS
which is available separately, on your PC. (nav-
gate FEEDS will be available on our website.)
Storing the customised POI properly and in-
serting the SD memory card enables the sys-
tem to use the data for searches.
1 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 13.
2 Display the
“Destination Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 18.
3 Touch [navgate FEEDS].
The
“Select POI” screen appears.
4 Touch the item you want.
5 Touch the POI you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
38.
Selecting a location you
searched for recently
The places that you have set as destination or
waypoint in the past are automatically stored
in
“History”.
p If no location is stored in Destination His-
tory, you cannot select [ History]. (If you
perform a route calculation, you can select
[
History].)
p “History” can store up to 100 locations. If
the entries reach the maximum, the new
entry overwrites the oldest one.
1 Display the “Destination Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 18.
2 Touch [History].
3 Touch the entry you want.
The searched location appears on the map
screen.
= For the subsequent operations, refer to Set-
ting a route to your destination on page
38.
Searching for a location by
coordinates
Entering a latitude and longitude pinpoints
the location.
1 Display the “Destination Menu” screen.
= For details of the operations, refer to Screen
switching overview on page 18.
2 Touch [Coordinates].
3 Touch [East] or [West], and then enter
the longitude.
To enter W 50°1
’5” for example, touch [West],
[0], [5], [0], [0], [1], [0] and [5].
Engb
36
Chapter
06 Searching for and selecting a location