Hdmi setup, 1 press , then press home menu, 2 select ‘system setup’, then press enter – Pioneer VSX-920-K User Manual
Page 64: 3 select ‘other setup’, then press enter, 4 select ‘hdmi setup’, then press enter, 5 select the ‘control’ setting you want, 6 select the ‘control mode’ setting you want, 7 select the ‘display power off’ setting you want, 8 when you’re finished, press home menu, Control with hdmi function 07
Control with HDMI function
07
64
En
HDMI Setup
You must adjust the settings of this receiver as
well as the connected
Control with HDMI-
compatible components in order to make use
of the
Control with HDMI function. For more
information see the operating instructions for
each component.
1
Press ,
then
press
Home Menu.
2
Select ‘System Setup’, then press ENTER.
3
Select ‘Other Setup’, then press ENTER.
4
Select ‘HDMI Setup’, then press ENTER.
5
Select the ‘Control’ setting you want.
Choose whether to set this unit’s
Control with
HDMI function
ON or OFF. You will need to set
it to
ON to use the Control with HDMI
function.
When using a component that does not
support the
Control with HDMI function, set
this to
OFF.
•
ON – Enables the Control with HDMI
function. When this unit’s power is turned
off and you have a supported source begin
playback while using the
Control with
HDMI function, the audio and video
outputs from the HDMI connection are
output from the TV.
•
OFF – The Control with HDMI is disabled.
Synchronized operations cannot be used.
When this unit’s power is turned off, audio
and video of sources connected via HDMI
are not output.
6
Select the ‘Control Mode’ setting you
want.
Choose whether you want to enable HDMI
for all linked functions or the PQLS function
only. However, Display Power Off will
activate the settings set forth in step 7 below.
•
ALL – Enabled for all linked functions.
•
PQLS – Enabled only for the PQLS
function. When
PQLS is selected, link
functions other than the PQLS function
may not work properly. If you wish to use
all link functions, select
ALL.
7
Select the ‘Display Power Off’ setting
you want.
If the TV’s power is turned off while using the
Control with HDMI function, the receiver’s
power is also turned off (all power off
function). This function can be disabled.
•
YES – The all power off function is enabled.
The receiver’s power turns off together with
the TV’s power.
This function only works when the input
for a component connected to the
receiver by
Control with HDMI is
selected or when watching the TV.
•
NO – The all power off function is disabled.
The receiver’s power is not affected when
the TV’s power is turned off.
8
When you’re finished, press HOME MENU.
You will return to the
Home Menu.
RECEIVER
2. Volume Setup
3. Remote Control Mode Setup
4. Flicker Reduction Setup
5. Pairing Bluetooth Device
1. HDMI Setup
4e.Other Setup
A/V RECEIVER
Exit
Return
4e1.HDMI Setup
A/V RECEIVER
Exit
Finish
Control
: ON
Control mode
:
ALL
Display Power Off
:
YES
VSX-1020_SYXCN.book 64 ページ ２０１０年３月１２日 金曜日 午前９時１０分