Pioneer VSX-920-K - Manual (Page 119)

Additional information 12
119
En
English
Français
Deutsch
Nederlands
Italiano
Español
ADAPTER PORT
Internet radio
Symptom Remedy
The Bluetooth wireless
technology device cannot
be connected or operated.
Sound from the Bluetooth
wireless technology device
is not emitted or the sound
is interrupted. • Check that no object that emits electromagnetic waves in the 2.4 GHz
band (microwave oven, wireless LAN device or Bluetooth wireless
technology apparatus) is near the unit. If such an object is near the unit,
set the unit far from it. Or, stop using the object emitting the
electromagnetic waves.
• Check that the Bluetooth wireless technology device is not too far from
the unit and that obstructions are not set between the Bluetooth wireless
technology device and the unit. Set the Bluetooth wireless technology
device and the unit so that the distance between them is less than about
10 m and no obstructions exist between them.
• Check that the Bluetooth ADAPTER and the
ADAPTER PORT of the unit
are correctly connected.
• The Bluetooth wireless technology device may not be set to the
communication mode supporting the Bluetooth wireless technology.
Check the setting of the Bluetooth wireless technology device.
• Check that pairing is correct. The pairing setting was deleted from this
unit or the Bluetooth wireless technology device. Reset the pairing.
• Check that the profile is correct. Use a Bluetooth wireless technology
device that supports A2DP profile and AVRCP profile.
Symptoms Causes Remedies
Cannot access the
network. (“
Connection
Error” shows in the
display.)
The LAN cable is not firmly
connected. Firmly connect the LAN cable (page 34).
The router is not switched on. Switch on the router.
The network device was switched on
when this receiver was already on. Switch the network device on before the
receiver.
Cannot listen to Internet
radio stations.
(“
Connection Error”
shows in the display.)
The firewall settings for components
on the network are currently in
operation. Check the firewall settings for components
on the network.
You are currently disconnected from
the Internet. Check the connection settings for
components on the network, and consult
with your network service provider if
necessary (page 104).
The URL for the Internet radio
station is incorrectly programmed. Check that the URL was correctly entered
when programming.
The broadcasts from an Internet radio
station are stopped or interrupted. Broadcasts may be interrupted or
suspended by the radio station.
An Internet radio station is selected
whose protocol this receiver does
not recognize. This receiver does not recognize protocols
other than ‘http’ and ‘mms’.
An Internet radio station had closed
or moved. Enter new internet radio station on the
Internet Radio Setup.
VSX-1020_SYXCN.book 119 ページ ２０１０年３月１２日 金曜日 午前９時１０分