Connecting a usb device, Connecting a usb device for advanced mcacc output, Connecting your equipment 03 – Pioneer VSX-920-K User Manual

Page 36

Connecting your equipment

Connecting a USB device

It is possible to play audio and photo files by
connecting USB devices to this receiver. It is
also possible to connect a USB keyboard (US-
international layout) to the receiver to enter text
in the following GUI screens.

• Change the input name in the

Input Setup

menu (page 43).

• Add names to radio station presets

(page 51).

• Enter Internet radio station URLs (page 55).

•

Switch the receiver into standby then

connect your USB device to the iPod/iPhone/
USB terminal on the front panel of this
receiver.

Connecting a USB device for
Advanced MCACC output

When using Auto MCACC (page 87) or Acoustic
Calibration EQ Professional (page 93) to
calibrate the reverb characteristics of your
listening room, the 3D graphs of the reverb
characteristics in your listening room (before and
after calibration) can be checked on a computer
screen.

The various MCACC parameters can also be
checked on the computer. MCACC data and
parameters are transferred from this receiver
to a USB device and by connecting the USB
device to a computer, the data is imported via
the MCACC software in the computer.

The MCACC software to output the results is
available from the support area of the Pioneer
website (http://www.pioneer.eu). Instructions
for using the software are also available here. If
you have any questions about the software,
please contact the Pioneer Service Center
specified on your warranty card.

See the documentation provided with the
Advanced MCACC PC Display Application
Software for more information.

• For the USB device connection and

operations, see Output MCACC data on
page 97.

Note

1 This receiver does not support a USB hub.

MASTER
VOLUME

MCACC

SETUP MIC

VIDEO CAMERA

iPod

iPhone

USB

HDMI 5

CONTROL

ON / OFF

USB mass

storage device

USB keyboard

VSX-1020/VSX-1025

2 The various parameters and the reverb characteristics data used for display on the computer are not cleared when

the power is turned off (see Output MCACC data on page 97).