Pioneer A-109 - Manual

Safety precautions
Before operating your unit, please read the following safety warnings.
WARNING
To prevent a fire or shock hazard, do not place any object filled with water on top
of this unit or expose it to rain, splashing, or moisture.
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING
SECTION CAREFULLY. The voltage of the available power supply differs accord-
ing to country or region. Be sure that the power supply voltage of the area where
this unit will be used meets the required voltage (e.g., 230V or 120V) written on
the rear panel.
WARNING
To prevent a fire hazard, do not place any naked flame sources (such as a lighted
candle) on the equipment.
WARNING
Slots and openings in the cabinet are provided for ventilation and to protect the
equipment from overheating. To prevent fire hazard, the openings should never
be blocked or covered with items (such as newspapers, table-cloths, and
curtains) or by operating the equipment on thick carpet or a bed.
Operating Environment
Operating environment temperature and humidity:
+5°C to +35°C (+41°F to +95°F); less than 85% RH (cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in locations exposed to high
humidity or direct sunlight (or strong artificial light).
• Only when the equipment is provided with speaker terminals
CAUTION
These speaker terminals are hazardous when live. When you connect or discon-
nect the speaker cables, to prevent the risk of electric shock, do not touch the
terminals before disconnecting the power cord.
• Only when the equipment is provided with batteries
When disposing of used batteries, please comply with the environmental
regulations in your area.
• Only when the equipment is not provided with a switch for the main power
supply
CAUTION
The standby button* will not completely switch off this unit from the MAINS
power supply, so make sure the unit has been installed so that the power cord
can be easily unplugged from the power supply in case of an accident. The
power cord should also be unplugged from the AC outlet when left unused for a
long period of time.
* Depending on the model, the following names may be used for the standby
button:
STANDBY STANDBY/ON —STANDBY_ON PLAY
CAUTION
The power switch* will not completely switch off this unit from the MAINS power
supply, so make sure the unit has been installed so that the power cord can be
easily unplugged from the power supply in case of an accident. The power cord
should also be unplugged from the AC outlet when left unused for a long period
of time.
* Depending on the model, the following names may be used for the power
switch:
POWER OFF/ON OFF/ON POWER —OFF_ON —OFF_ON
English