Olympus LS-20M - Manual (Page 90)

0
5
EN
Connecting to your PC
1 Boot the PC.
Connect the USB cable to the USB port
of the PC.
While the recorder is during stop mode
or turned off, connect the USB cable to
the connecting terminal on the bottom
of the recorder.
• [Remote (Storage)] is displayed on the
recorder if the USB cable is connected.
• When the recorder is using the USB
connection setting, it will not be connected
to the PC when [A C Adapter] is selected.
Select [PC] in the USB connection setting
(☞ P.84).
Windows:
When you connect the recorder to Windows
and open [My Computer], it will be recognized
by the drive name of the product name.
Inserting an SD card will allow you to use it as
[Removable Disk].
Macintosh:
When you connect the recorder to Mac OS, it
will be recognized by the drive name of the
product name on the desktop. If an SD card is
inserted, [LS20M] will be displayed.
Notes
• Before connecting the USB cable, exit HOLD
mode.
• Refer to the user’s manual for your PC regarding
the USB port on your PC.
• Be sure to push the cable connector all the way
in. Otherwise, the recorder may not operate
properly.
• When connecting the recorder through an USB
hub the operation may become unstable. In
such cases, refrain from using a USB hub.
• Be sure to use the included dedicated USB cable.
If any other company’s cable is used, it may lead
to malfunction of the recorder. Also, never use
this dedicated cable with any other company’s
products.
Connec
ting t
o y
our PC