Setting an index mark a – Olympus LS-20M User Manual

Page 52

• To add index marks, the index

function must be registered to the Fn

button (☞ P.74).

Setting an index mark

If index marks is placed, you can quickly find a

location you want to listen to in fast forward and

fast rewind and when cuing a file. Index marks

can be added only during PCM recording with

this recorder or to PCM files recorded using this

recorder.

Press the

Fn button at the position you

want to add an index mark.

• A number appears on the sub LCD and an

index mark will be placed.

• Even after an index mark is placed,

recording, shooting or playback will

continue so you can place index marks in

other locations in a similar manner.

Setting an index mark A

Clearing an index mark

Select a file in which index marks you

wish to erase are contained.

Press the 9 or 0 button to select

the index mark to erase.

While the index number is displayed

for approximately 2 seconds on the

sub LCD, press the

ERASE button.

• The index mark is erased.

• Index numbers after the erased index

number will be automatically decreased by 1.

Notes

• During recording or playback, the main LCD is

off.

• Up to 16 index marks can be set in a file. If you

try to place more than 16 index marks, the

[Index Full] message will appear for index

marks.

• Index marks cannot be set or erased in a locked

file (☞ P.72).

• An index mark cannot be added to a movie file

shot with the recorder or a file in MP3 format.

Setting an inde

x mark