Olympus LS-20M - Manual (Page 83)

4
EN
Fn Setting [Fn. setting] A n
When functions are registered in the Fn button,
each time the Fn button is pressed, you can set or
change the menu of registered function.
Setting
[Off]: No functions will be allocated to the button.
[INDEX]: (☞ P.52).
[Rec Mode]: (☞ P.65).
[Rec Level]: (☞ P.65).
[Play Mode]: (☞ P.71).
[Equalizer]: (☞ P.71).
[Property]: (☞ P.72).
[Light]: (☞ P.73).
[Image Quality]: (☞ P.68).
[Reverse Angle Recording]: (☞ P.68).
[Magic Movie ]: (☞ P.69).
[White Balance]: (☞ P.69).
[Exposure Comp.]: (☞ P.70).
To call up a registered function:
When the Fn button is pressed, menu setting
display of registered function will appear:
[Rec Mode]:
[PCM] [MP3]: The recording rate can be
configured for each file format.
[Rec Level]:
[Manual] [Auto]: You can configure whether to
adjust the recording level automatically or to
adjust it manually. When the [Rec Level] is set to
[Manual] you can configure the limiter function.
[Play Mode]:
[File] [File Repeat] [Folder]
[Folder Repeat] [All][All Repeat]
[Equalizer]:
[Off] [Rock] [Pop] [Jazz] [User] Select [User]
to save your own custom
equalizer settings.
[Property]:
File and folder information can be confirmed
from the menu screen.
[Light]:
[On] [Off]: By pressing the Fn button, you can
turn the backlight of the sub LCD on or off.
[Image Quality]:
The image quality (resolution) and recording
rate can be configured.
[Magic Movie]:
[On]:[Rock1] [Rock2] [Rock3][Pop] [Pinhole]
[Sketch]
[Off]
[White Balance]:
[Auto] [Sunny] [Cloudy] [Fluorescent]
[Incandescent] [Quick Operation]
[Exposure Comp.]:
You can adjust the exposure from [-2.0] to [+2.0]
in increments of 1/3.
Each time the Fn button is pressed, the setting of
registered function is changed:
[Reverse Angle Recording]:
[On] [Off]: Select [Reverse Angle Recording]
on or off by pressing the Fn button.
If the Fn button is pressed during operation, the
registered function is performed:
[INDEX]:
With each press of the Fn button, an index mark
is added.
Notes
• When the registered function is [Rec Mode]
or [Property], these will not function if the
Fn button is pressed during operation. While
the recorder is during stop mode, press the Fn
button.
• The following functions can be used also when
the recorder is operating.
[Equalizer], [Light], [INDEX]
Menu setting method
Menu setting method