Olympus LS-20M - Manual (Page 25)

1
EN
• Follow the same steps by pressing the 9
or 0 button to select the next item, and
pressing the + or − button to set.
• You can select between 12 and 24 hour
display by pressing the LIST button while
setting the hour and minute.
Example: 10:38 P.M
10:38 PM
(Initial setting)
22:38
• You can select the order of the “Month”,
“Day” and “Year” by pressing the LIST
button while setting them.
Example: March 24, 2011
3M 24D 2011Y
(Initial setting)
24D 3M 2011Y
2011Y 3M 24D
Setting the time and date beforehand enables
easier file management.
The recorder stores the time information
automatically with the recording.
When you use the recorder for the first
time after purchasing it, or when the
battery have been inserted without the
device having been used in a long time, the
[ Set Time & Date] will appear. When the
“ Hour” is flashing, conduct the setup from
Step 1.
1 Press the 9 or 0 button to select
the item to set.
• Select the item from the “Hour”, “Minute”,
“Year”, “Month” and “Day” with a flashing
point.
Press the + or − button to set.
Setting time and date [Time & Date]
+− button
9
0 button
` OK button
Press the ` OK button to complete the
setting.
• The clock will start from the set date and
time. Press the `OK button according to the
time signal.
Se
tti
ng t
im
e a
nd d
at
e