How to begin segment repeat playback a n – Olympus LS-20M User Manual
Page 57
3
EN
1
Select a file that has a segment you
would like to play back repeatedly, and
start playback.
This function enables repeated playback of part of
the file being played.
Press the
A-B REPEAT button at the
point you want to start segment repeat
playback.
• [w] will flash on the sub LCD.
Note
• If an index mark is placed or cleared during
segment repeat playback, segment repeat
playback will be canceled and it will return to
normal playback mode (☞ P.52).
Canceling the segment repeat playback function
A-B REPEAT
button
• Fast forwarding and rewinding can be
conducted when [w] is flashing in the same
manner as during normal playback, and
you can quickly proceed as far as the end
position (☞ P.49).
• When it reaches the end of the file while [w]
is flashing, point [x] becomes the end of
the file, and repeat playback will start.
Press the
A-B REPEAT button again at
the position where you want to end
segment repeat playback.
• The recorder continuously plays back the
segment until the segment repeat playback
is canceled.
Pressing any of the following buttons will
release the segment repeat playback.
a
Press the `
OK or STOP (4) button
Pressing the `OK or STOP (4) button will
release segment repeat playback, and stop
playback.
b
Press the 9 button
Pressing the 9 button will release segment
repeat playback, and make the recorder to skip
to the beginning of the next file.
c
Press the 0 button
Pressing the 0 button will release segment
repeat playback, and make the recorder to skip
to the beginning of the current file.
d
Press the
A-B REPEAT button
Pressing the A-B REPEAT button will release
segment repeat playback, and it will return to
normal playback mode.
How to begin segment repeat playback A
n
Ho
w t
o begin segment repea
t pla
yback
A
n