Olympus LS-20M - Manual (Page 20)

0
1
EN
Connect to the USB-AC adapter to charge
It can be charged by connecting to the USB-AC
adapter (F-3AC).
1 Plug the recorder’s USB cable into the
AC adapter.
• Before connecting the AC adapter,
switch the USB connection setting to
[AC Adapter] (☞ P.84).
• Before connecting the USB cable, exit
HOLD mode (☞ P.24).
Connect the AC cable to the AC
adapter, and then to an AC outlet.
To the USB-AC
adapter’s (F-3AC) USB
connector
Power supply
To the
AC outlet
While the recorder is during stop mode
or turned off, connect the USB cable to
the connecting terminal on the bottom
of the recorder.
To the USB
connector
Press the ` OK button to start
charging.
• While [Press OK to start charging] is
flashing, press the `OK button.
Charging is completed when [ Battery
Full] is displayed.
Po
w
er s
up
ply