Hold – Olympus LS-20M User Manual

Page 24

If you set the recorder to HOLD mode, the running conditions will be preserved, and all buttons will be

disabled. This feature is useful when the recorder has to be carried in a bag or pocket. This mode can also

prevent you from accidentally stopping recording or shooting.

Set the recorder to HOLD mode

Slide the

POWER/HOLD switch to the

[

HOLD] position.

• After [Hold] appears on the sub LCD, the

recorder is set to HOLD mode.

Notes

• If you press any button in HOLD mode, the clock display lights for 2 seconds, but it will not operate the

recorder.

• If HOLD is applied during operation of the recorder, operation is disabled and the operation state is

preserved (if playback has ended or recording or shooting has ended due to the remaining memory being

used up, the recorder will enter the stopped state).

• The recorder can be effectively operated via the exclusive remote control set RS30W (optional), even when

it is in HOLD mode.

HOLD

Exit HOLD mode

Slide the

POWER/HOLD switch to the A

position.