Olympus LS-100 - Manual (Page 94)

94
EN
6
Fil
e
m
e
nu
10
Press
F2 (OK) button.
• [Moving!] or [Copying!] appears on
the display, and moving or copying of
the file starts.
• When [File move completed] or [File
copy completed] is displayed, the
process is completed.
Notes
• When the remaining space in the memory is
insufficient, the copying process is unavailable.
• When the total number of files exceeds 999, the
moving or copying process is unavailable.
• Do not remove the batteries during the file
moving or copying process. The data may get
damaged.
• A file cannot be moved or copied in the same
folder.
• When the moving or copying process is can-
celled partway through the process, the process
is completed for all files that have already been
moved or copied. For all other files, the process is
cancelled.
• All files for which File Lock ( ☞ P. 91) is set
continue to be protected by File Lock after the
moving or copying process.
• The moving or copying process cannot be used
for files located directly under the [Recorder]
folder.
• Only [44.1kHz/16bit] or [44.1kHz(mono)]
files recorded in recorder mode can be moved
or copied to [Multitrack]. The move and copy
processes are unavailable if there is no PRJ folder.
• You can move or copy a file recorded in Multi-
Track Mode to [Recorder].
File menu [File Menu]
Moving/copying to [Recorder]
1 Press the +/− button to select a
folder to be moved or copied.
Moving/copying to [Multitrack]
1 Press the +/− button to select a
project to be moved or copied.