Olympus LS-100 - Manual (Page 23)

23
EN
2
Po
w
e
r S
u
p
p
ly
Power Supply
▌Connecting the recorder to a PC
with the USB cable for recharge
Notes
• When the unit's [USB Class] is set to [Composite]
with the [USB setting], charging will not start
(
☞ P. 110).
• Stop or turn off the recorder before connecting
the USB cable.
1
Start up the PC.
2
Connect the USB cable to the USB
port on the PC.
3
Connect the USB cable to the USB
terminal of the recorder.
• The PEAK display lamp (R) lights up in
orange and recharging starts.
Battery indicator
The battery indicator on the display
changes as described below according to
the remaining battery level.
• When [
] appears on the display,
recharge the battery as soon as possible.
When the battery runs out, [
] and
[Battery low] are displayed and opera-
tion stops.
• The battery indicator repeatedly appears
during recharge.