Olympus LS-100 - Manual (Page 80)

80
EN
6
Re
co
rd
in
g
me
n
u
3
Press the
+/− button to select the
recording method.
[Normal]
This method records sound in the
standard way (
☞ P. 37).
[Overdub]
While a file is playing, the input sound can
be recorded over the current file (
☞ P. 39).
[Play Sync]
Only the audio source that was re-
corded in synchronizaton with the file
content is saved (
☞ P. 41).
[V-Sync. Rec]
This method automatically star ts
recording when a sound that is louder
than the set audio synchro level is
detected (
☞ P. 43).
4
Press the
OK button.
• When [V-Sync. Rec] is selected, the
Menu screen opens.
When [V-Sync. Rec] is selected
1 Select a menu item by pressing the
+/− button and then the OK button.
[Mode] setting
1 By pressing the +/− button, select
either [One time] or [Continuous]
and then press the
OK button.
[One time]
After completion of recording, the file
closes, and the device shifts into the
recording stop status.
[Continuous]
After completion of recording, the file
closes and the device shifts into the
recording wait status. When any sound
is detected, the sound is recorded in a
new file.
Recording menu [Rec Menu]
Recording mode [Rec Mode]
This menu sets the recording method of the
recorder mode.
1
[Menu] { [Rec Menu] { [Rec Mode]
[On] setting
1 Press the OK button.
• V-synchro recording functions.
• When [Rec Mode] is changed to a
different mode, the function turns off
automatically.
[V-Sync. time] setting
1 Select the detect time by pressing the
+/− button and then the OK button.
• This setting sets the detecting time. When
the input (recording level) remains lower
than the specified setting for longer than
the set detecting time, the recorder shifts
into the wait status or the stop status.
2
Press the
OK button.