Olympus LS-100 - Manual (Page 61)

61
EN
4
Creatin
g
a Mul
ti-
Tr
a
ck Proj
e
c
t
Creating a Multi-Track Project
Check the track (playback)
7
1 Press the PLAY button.
• The multiple tracks you have recorded under
the project will be played back together.
• You can change the pitch by pressing the p/
q button while a track is selected. Pressing
the
p button will raise the pitch by a semitone
(#1–6), while the
q button lowers it by a
semitone ( 1–6). Set the cursor to the track
you wish to playback and press the Fn (Key)
button; you will be able to adjust the key of
the selected track. Be sure to assign the [Key
Change] function to the Fn button in advance
(
☞ P. 107). However, you cannot select a track
for key adjustment while playback is in progress.
a Current pitch
• To listen to a specific track while muting the
others, set the cursor to the track you wish
to play back, and press the Fn (Solo) button.
Pressing the button again releases the [Solo]
function. Be sure to assign the [Solo] function
to the Fn button in advance (
☞ P. 107).
• To rewind the file, press and hold the 0
button when the recorder is in playback mode
or stop mode.
• To fast-forward the file, press and hold
the
9 button when the recorder is in
playback mode or stop mode.
a
Adjust the track
1 Select a track to adjust with the +/− button.
2 Press the 9 button to choose the
setting you wish to change.
• The edit screen switches each time you press
the
9 button. To return to the previous
screen, press the
0 button.
4 Mute: Press 9 once.
Mute can be set for each track. Change the
mute setting with the
+/− button.
The mute function can be assigned to the
Fn
button.
Continued on next page
8