Olympus LS-100 - Manual (Page 30)

30
EN
2
Ins
e
rt
in
g an
d R
e
m
o
v
in
g
th
e S
D
C
a
rd
Inserting and Removing the SD Card
Removing the SD card
Press the SD card all the way into the
recorder and slowly pull it out.
• If [SD card] is selected in [Memory Select],
the [Internal memory selected] message
is displayed.
Notes
• When you remove the SD card, it may swiftly
pop out if you suddenly take away your finger
that was pushing the SD card or push the SD
card out by flipping it.
• The recorder may not correctly recognize some
SD, SDHC or SDXC cards depending on the
manufacturer or card type due to compatibility.
• Be sure to read the attached SD card manual
before use.
• If the SD card is not recognized, remove the SD
card and then insert it again to see if the recorder
recognizes it.
• The processing speed may become lower de-
pending on the type of SD card. The processing
performance may deteriorate if the SD card is
repeatedly written to or deleted. In such a case,
initialize the SD card again (
☞ P.114).
• For the SD cards certified according to our
standards, refer to the support page on our Web
site:
http://olympus-europa.com/
Although the manufacturers and types of SD
cards whose operation we have certified are
listed on our Web site, operation of these SD
cards is not guaranteed. Note that it may become
impossible to correctly recognize a listed card
due to specification changes by the manufacturer
or other reason.
If the SD card is in the write protection
mode, the [SD card locked] message is
displayed.Clear write protection before
inserting the card.
When the write protection switch is set
to [LOCK], recording
or other operations
cannot be performed.
SD card
LOCK