Olympus LS-100 - Manual (Page 62)

62
EN
4
Creatin
g
a Mul
ti-
Tr
a
ck Proj
e
c
t
Creating a Multi-Track Project
4 Output balance: Press 9 twice.
You can adjust the volume for each track.
Adjust the volume with the
+/− button.
4 Left/right balance: Press 9 three times.
You can adjust the panning of left and right
audio for each track. Adjust the left/right
balance with the
+/− button.
4 Track assignment: Press 9 four times.
You can assign files that are managed under a
project to specific tracks. Use the
+/− button
to select files to assign and target tracks, and
press the
OK button.
8
Add tracks
You can record additional tracks while playing
back a previously recorded track.
1 Select an empty track with the +/−
button.
a Empty track
2 Press the REC button to enter the
recording standby mode.
3 Adjust the recording level with the REC
LEVEL dial.
4 Press the PLAY button to play back the
previously recorded track.
• All files assigned to the track will be mixed
and played back.
• The audio of mixed playback will be output
through the EAR jack.
• Recording starts at the same time as playback.
Continued on next page
9
Repeat steps 3 to 6 to
add more sound
sources to empty
tracks.
a