Olympus LS-100 - Manual (Page 27)

27
EN
2
Initial Settings before Using the Recorder
When the recorder is turned on in the following cases, [Set time & date] is
displayed.Set the clock according to the procedure below, beginning with step 1.
• When using the recorder for the first time.
• When inserting the battery after not using the recorder for a long time.
• When the clock has not been set.
2
Select the current date or time by pressing the
+/− button.
• Repeat to select the next setting item with the
9/0 button and select the current date or time
with the
+/− button.
3
Press the
OK button to complete setting.
• The recorder clock starts operating from the set date
and time. Press the
OK button in synchronization
with the time signal or other clock.
Setting the date and time [Time & Date]
When the date and time are set, the recording time information is automatically recorded for
each file. Set the date and time in advance for easy management of recorded files.
1
2
3
Ini
tial S
e
tt
in
gs b
e
fo
re U
sin
g th
e R
e
co
rd
er
1
Select the setting item by pressing the
9/0 button.
• Select the item you want to set from "Year", "Month",
"Day", "Hour", and "Minute" so that the item flashes.