Olympus LS-100 - Manual (Page 84)

84
EN
6
Re
co
rd
in
g
me
n
u
Recording menu [Rec Menu]
3
Press the
+/− button to select a
menu item.
[Phantom Power]
This setting sets the voltage of the
phantom power.
[Plug-in Power]
This setting sets the power supply of
the plug-in power.
4
Press the
OK button.
• The selected menu screen appears.
Microphone power source [Mic Power]
This setting sets the voltage used when a
microphone or an external unit which needs
the phantom power supply is connected. It
also sets whether the power is supplied to
the external microphone corresponding to
the plug-in power function.
1
[Menu] { [Rec Menu] {
[Mic Power]
2 To enable the setting, turn [ON] the
XLR Power switch on the recorder.
When [Phantom Power] is selected
1 Select the voltage by pressing the +/
− button and then the OK button.
When [Plug-in Power] is selected
1 By pressing the +/− button, select
either [On] or [Off] and then press
the
OK button.
2
Press the
OK button.
• Even if the microphone is not
connected, the remaining battery
time will be reduced faster if the XLR
power switch is turned [ON], so
please be careful.