Olympus D-550 Zoom - Manual (Page 95)

Pl
ayba
ck
5
94
Erasing pictures
This function enables you to erase recorded pictures. This can be done either
one frame at a time or to all the pictures on the card at once.
Single-frame erase
1
Press with the lens barrier closed.
The monitor turns on.
2
Press to select the
picture you want to erase.
“Playing back still pictures” ( p.83)
3
Press .
The top menu is displayed.
4
Press to select ERASE.
5
Press to select YES, then
press .
The picture is erased and the menu is
closed.
• Erasure is not possible if the picture you want to erase is protected or
a write-protect seal is attached to the card. Before erasing, unprotect
the picture or remove the write-protect seal from the card.
• Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.
“Protecting pictures (Protect)” (
p.92)
MODE%MENU INFO
ERASE
YES
NO
SELECt GO
ERASE