Olympus IR-500 User Manual
Page 72
72
Chap
te
r
4:
S
e
tt
ing accordi
ng t
o
s
h
oot
ing condi
tio
n
s
Adjusting the settings to suit a bright/dark subject (
F)
3
Press
d to enter the exposure compensation settings, then press a/
c to select the exposure compensation value.
The gauge for adjusting exposure compensation appears on the monitor.
4
Press
9.
The selected exposure compensation value is set. Press p to start shooting with the new
settings.
Tips
• Often bright subjects (such as snow) will turn out darker than their natural colors. Adjusting towards “+”
makes these subjects closer to their real shades. For the same reason, adjust towards “–” when shooting
dark subjects.
• We recommend that you return the exposure compensation value to “0.0” after taking a picture with an
adjusted exposure compensation.
• To save the selected exposure compensation value for the next time you use the camera, set “ALL RESET”
to “OFF.” For details, see “Saving the settings (ALL RESET)” (
Note
If the flash is used, the image brightness (exposure) may differ from the intended brightness (exposure).
OK
0.0
0.0
GO
SELECT
CANCEL
Adjusts towards “+” to
give a brighter image.
Adjusts towards “–” to
give a darker image.
+2.0
+2.0
4M
4M
Exposure compensation value
If a value other than “±0” is set, it appears on
the monitor. If “±0” is set, the exposure
compensation value on the monitor
disappears.
00E Adam .book Page 72 Tuesday, November 9, 2004 3:24 PM