Olympus IR-500 - Manual (Page 36)

36
Ch
ap
ter 2:
Prep
arati
o
n
Power on/off
Power on/off
Opening the multi-swing display
The camera automatically turns on when the multi-swing display is opened. The camera turns off
when the display is closed.
Pressing the power switch
When the camera is off with the multi-swing display opened, press the power switch to turn on
the camera. The power lamp lights up. To turn off the camera, press the power switch again.
Tips
• If the camera is not operated for a certain period of time, the camera automatically enters the sleep mode
(standby mode) to save battery power, and the power lamp goes off. To cancel the sleep mode, press any
button. You can select how long the camera is on before it enters the sleep mode. For details, see
“Changing the sleep timer duration (SLEEP)” (
g page 153).
• When the camera has been turned on by opening the multi-swing display in the shooting mode, if no
operation is made in the first 30 seconds, the camera may turn off automatically.
• The card check is performed when you turn on the camera. If any error message appears on the monitor,
check “Error message list” (
g page 223) to solve the problem.
Multi-swing display
OPEN
QUICK VIEW
OPEN
POWER
OK
Power switch
Power lamp
Lights up when the camera is on.
00E Adam .book Page 36 Tuesday, November 9, 2004 3:24 PM