Olympus IR-500 User Manual
Page 118
118
Ch
ap
ter 5:
P
layi
n
g
/E
d
it
in
g
imag
es
Editing still pictures (EDIT)
3
Press
p to display the playback menu, then press
a/c to select
“R.”
Press
d to enter the recording sound settings.
4
Press
9.
Sound recording begins. When recording ends, the screen returns to the playback menu.
Press p to return to playback mode.
Notes
• Sound cannot be recorded to protected pictures. Cancel the protection setting before recording sound. For
details, see “Protecting pictures (
• Sound cannot be recorded to pictures which have been recorded to an album.
• Sound cannot be recorded when there is insufficient card storage capacity.
• Sound cannot be recorded to pictures saved as “read-only” using a computer. You must cancel “read-only”
using your computer.
• If the source of the sound you are recording is more than 1 m (3.3 ft.) from the microphone, the recorded
sound may not be very clear.
• When buttons are operated during sound recording, button operation sounds may be recorded.
• You cannot erase recorded sounds. If you want to erase sound of a picture, re-record the sound of the
picture in a quiet place.
START
INFO
4M
4M
100
00-0009
0009
'04.
'04.12.03.14:03
12.03.14:03
9
“H” appears when a
picture with sound is played
back.
Recording sound
00E Adam .book Page 118 Tuesday, November 9, 2004 3:24 PM