Konica Minolta bizhub C451 - Manual (Page 78)

Setting up network printing 3
C451 3-3
Network connection methods that can be selected in each Windows op-
erating system
This chapter describes the settings that must be specified for network print-
ing.
Setting procedures differ depending on the method of networking printing
used (SMB, LPR, or IPP printing). Select the best method of network printing
for your Windows environment.
Network printing from a Windows operating system
2
Reminder
Before setting up network printing, install the printer driver. For details on
installing the printer driver, refer to “Installing the printer driver” on
page 2-1.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the set-
tings on this machine as necessary.
For an IPP connection, it is necessary to install the printer driver first.
Network printing in a NetWare environment
Protocol
used Windows
2000 Windows
XP/Vista Windows NT
4.0 Windows
Server 2003
SMB printing TCP/IP, Net-
BEUI o o o
LPR printing TCP/IP o o o o
IPP printing TCP/IP o o o
Port 9100
printing TCP/IP o o o
NetWare version Protocol used Emulation Service mode
NetWare 4.x IPX NDS/Bindery PServer/Nprinter
NetWare 5.x/6 IPX NDS PServer
TCP/IP NDPS (lpr)