Konica Minolta bizhub C451 - Manual (Page 115)

Setting up network printing 3
C451 3-40
3
Specify settings for the following. After specifying the settings, touch
[OK].
– AppleTalk Setting: Select [ON].
– Printer Name: Specify the printer name (up to 31 characters).
– Zone Name: Specify the zone being connected to (up to 31 charac-
ters).
4
To apply the settings, restart this machine (turn the main power off,
then on again).
2
Reminder
When turning the power off, then on again, wait at least 10 seconds be-
fore turning the power on again; otherwise, this machine may not function
properly.
Specifying the Bonjour settings
When connecting this machine to a Macintosh computer using Bonjour/Ren-
dezvous, the Bonjour settings must be specified.
2
Note
The Bonjour connection is a Mac OS X 10.4 function, it is the same func-
tion as the Rendezvous connection in Mac OS 10.3 or earlier.
1
Press the [Utility/Counter] key in this machine’s control panel, touch
[Administrator Settings], and then enter the administrator password.
– The administrator password is required to enter Administrator
mode. Ask the administrator of this machine for the administrator
password.