Konica Minolta bizhub C451 - Manual (Page 211)

Setting up the PostScript driver (Windows) 6
C451 6-16
Setting the binding margin
Binding margins are added to the document before it is printed.
1
Click the Layout tab.
2
From the “Binding Position” drop-down list, select the binding position.
3
Select the “Binding Margin” check box.
4
To set the width of the binding margin, click the [Binding Margin Set-
tings] button, and then specify the desired settings in the Binding Mar-
gin Settings dialog box that appears.
– Shift Mode: To add a binding margin, select how the image is to be
shifted.
– Front Side/Back Side: Sets the binding margin values. By clearing
the “Same value for front and back sides” check box, you can
specify separate values for the front and back sides.
– Unit: Selects the measurement unit that specifies the size.