Konica Minolta bizhub C451 - Manual (Page 63)

Installing the printer driver 2
C451 2-18
Installing the printer driver using Plug and Play
For Windows 2000
1
After using a USB cable to connect this machine to a computer, turn
on the computer.
– Do not disconnect or connect the cable while the computer is start-
ing up.
2
Insert the printer driver CD-ROM into the computer’s CD-ROM drive.
3
Turn the main power of this machine on.
The Found New Hardware Wizard starts up.
4
Select “Search for a suitable driver for my device (recommended)”, and
then click the [Next] button.
5
Select “Specify location”, and then click the [Next] button.
6
Specify the desired folder on the CD-ROM that contains the printer
driver, and then click the [OK] button.
– Select the specified folder according to the printer driver to be
used, the operating system, and the language.
– Printer drivers that can be selected: Windows 2000: PCL driver, PS
driver, Fax driver
7
Click the [OK] button, and then follow the on-screen instructions.
8
Click the [Finish] button.
9
When installation is complete, make sure that the icon of the installed
printer appears in the Printers window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.