Konica Minolta bizhub C451 - Manual (Page 280)

Setting up the PPD driver (Mac OS X) 8
C451 8-22
8.6 Paper Tray/Output Tray
Paper Tray: Selects the paper tray for printing.
Paper Type: Selects the paper type for printing. This setting can be specified
when the paper tray setting is set to “Auto”.
Paper Settings for Each Tray: Specifies the paper type for each paper tray.
For details, refer to “Specifying the paper type for a paper tray” on
page 8-23.
Output Tray: Specifies the tray where to output the printed pages.
2
Note
If “Auto” is specified as the paper tray, you can select the paper type. If
the paper tray setting is changed to a setting other than “Auto”, the paper
type is fixed to its preregistered setting. Specify a paper type by clicking
the [Paper Settings for Each Tray] button.