Konica Minolta bizhub C451 - Manual (Page 301)

Function detail description 9
C451 9-4
– If the job you want to release is not displayed, touch [ ↑] or [↓] until
the desired job is displayed. If a wrong job was selected, touch the
button for the selected job again to cancel it.
4
Touch [Change Setting].
The Change Setting screen appears.
5
Change the print settings on the Change Settings screen, and then
touch [OK].
– To check the results of setting changes, select the job whose sam-
ple copy is to be printed from the job list, and then press the [Proof
Copy] key on the control panel.
One copy is printed for checking.
Using the [Proof Copy] key restores the previous settings. Specify
the settings again as necessary.
The Release Held Job screen appears again.
6
Touch [OK], or press the [Start] key in the control panel.
The stored job is changed to an active job, then printed.
2
Note
To cancel printing the job, touch [Cancel].