Konica Minolta bizhub C451 - Manual (Page 403)

Various settings 10
C451 10-47
3
Press the [C] (clear) key to erase the value, and then use the keypad to
type in the default length of time (between 10 and 1000 seconds).
– If a value outside of the allowable range is specified, the message
“Input Error” appears. Type in a value within the allowable range.
4
Touch [OK].
The time until a communication timeout occurs is set.
Print XPS Errors
You can specify whether to print an error message when an error occurs dur-
ing XPS printing. (Default setting: No)
!
Detail
For details on displaying the Administrator Settings screen, refer to “To
display the Administrator Settings screen” on page 10-34.
1
In the Administrator Setting screen, touch [7 Printer Setting].