Konica Minolta bizhub C451 - Manual (Page 153)

Setting up the PCL driver (Windows) 5
C451 5-8
To print data of the size as large as the standard size, by selecting “W”
for each standard size paper for “Original Size”, the data can be centered
and printed on papers larger than the original size.
For example, if you want to center and print 8-1/2 × 11 size data on 11 ×
17 size paper, create data in the size of “8-1/2 × 11W”, and then specify
“8-1/2 × 11W” for “Original Size” and specify “Paper Tray” as the tray to
be used with the printer driver.
On the machine side, load 11 × 17 size paper into the tray to be used,
select the tray in [Basic screen (Paper)], select [Change Tray Setting] -
[Wide Paper] on the control panel, specify “8-1/2 × 11W”, and then check
that [Auto Detect] is selected in [Custom Size] and “11 × 17” is displayed.
When 12-1/4 × 18 size papers have been loaded, [12-1/4 × 18] must be
selected in [Custom Size].
To print on a custom size, use the bypass tray, select [Change Tray Set-
tings] - [Wide Paper], select “8-1/2 × 11W”, and then select the paper size
to use from [Change Size].
For details on the paper size that can be loaded into the tray, refer to the
User’s Guide [Copy Operations].
Specifying a custom size
When printing on paper of a custom size, you can select a preregistered cus-
tom paper size or specify a paper size value as described below.
1
From the “Original Size” or the “Paper Size” drop-down list, select
“Custom Size”.
The Custom Size Settings dialog box appears.
2
Specify settings for the following:
– Width: Specifies the width of the custom paper size according to
the selected measurement unit.
– Length: Specifies the length of the custom paper size according to
the selected measurement unit.