Reference, 9. 2 user mode 02 (warm sleep mode) – Konica Minolta KIP Color 80 User Manual
Page 49
1-44
2. 9. 2 User Mode 02 (Warm Sleep Mode)
Warm Sleep Mode can be worked or cancelled, and the timer setting is available as well if Warm
Sleep Mode is worked.
[Operation]
1. Press the Menu Key twice to select the User Mode 02.
2. Press the Enter Key. The setting value on the right hand flashes and becomes changeable.
3. ON/OFF selection for the Warm Sleep Mode can be specified at first. Select “On” for making
the Warm Sleep Mode work, and select “OFF” for cancelling it. “On” and “OFF” can be
switched with pressing [ ] and [ ] keys.
On : Warm Sleep ON (enabled)
OFF : Warm Sleep OFF (disabled)
Menu
Enter
Online
Menu
Enter
Online
Menu
Enter
Online
Warm Sleep Mode is a kind of power saving mode. It works when the KIP Color 80 does not
print for the time the timer specifies. Power consumption is reduced by maintaining the
temperature of fuser at a lower degree than usual stand by state.
Warm Sleep Mode will be cancelled automatically when a print job or a copy job is sent from
the outer device. However it may take time until the KIP Color 80 starts printing as it needs to
recover enough temperature on the fuser. (Print does not start until the KIP Color 80 gets
ready recovering enough temperature.)
Reference
Menu
Enter
Online
Menu
Enter
Online
Menu
Enter
Online