Replacing media, 3 replacing the roll media, Reference – Konica Minolta KIP Color 80 User Manual

Page 24

1-19

2. 3 Replacing the Roll Media

The Roll Empty Indicator lights red when the used roll media is emptied during printing.
Install a new roll media as instructed in below.

Roll Empty Indicator

1 2 3 4

Paper Deck

D10

Wire-Clean

Enter

Online

Copy Density

Select

Cut

(1) Even if the KIP Color 80 is printing, a Roll Deck may be able to open without
interrupting the printing operation for replacing the roll media.
Whether a certain Roll Deck can be opened or not is shown by the corresponding”In Use”
indicator.
A Roll Deck can be opened for replacing the roll media even during printing if the
concerning In Use Indicator is not lighting.
Do not open the Roll Deck when its In Use Indicator is lighting.
Refer to the [1.3.6.3 “In Use” Indicator] on page 1-138 for further detail.

(2) The Roll Empty Indicator informs just “any” roll media is empty. Check the Roll Level
Indicator on the Media & Toner Information Panel to know which of 4 roll media is empty.
Media Size Indicator, Media Type Indicator and all of 4 LED of the Roll Level Indicator go
off if the concerning roll media is empty.

Roll Level

Plain Paper
Vellum/Tracing
Film
Gloss

In Use

All the indicators go off when empty

(3) A new roll paper can be installed by the common method to all of 4 Roll Decks.

Reference