Konica Minolta KIP Color 80 - Manual (Page 29)

1-24
9. Media Selector is on the right of the Roll Deck.
Press any of “PLAIN PAPER”, “VELLUM / TRACING”, “FILM” and “GLOSS” according to the
type of the installed media.
PLAIN PAPER
Select when bond (plain) paper is installed.
VELLUM/TRACING Select when vellum (tracing paper) is installed.
FILM Select when film is installed.
GLOSS Select when glossy paper is installed.
Select either “ENGINEERING” or “ARCHITECTURE” according to the format as well.
ENGINEERING
Selected when the switch is up.
ARCHITECTURE Selected when the switch is down.
10. Close the Roll Deck until it is locked firmly.
11. Set / confirm the type of media on the KIP Color Server (PC).
NOTE
Do not make a wrong selection on these switches.
A wrong setting for the type of media will lead to an unstable image (fusing defect) or some
other quality problem.
A wrong setting for the format of media will lead to a wrong image placement on the media.